Exploration of Carbon Fiber Concrete with Silica Fume Admixture for Potential Application in Rigid Pavement Systems

Authors

  • Nadeem Qadir M. Tech Scholar, Department of Civil Engineering, RIMT University, Mandi Gobindgarh, Punjab, India
  • Er. Asif Altaf Assistant Professor, Department of Civil Engineering, RIMT University, Mandi Gobindgarh, Punjab, India

Keywords:

Fiber-reinforced Concrete, Aspect Ratio, Glass Fiber Reinforced Concrete (GFRC), Pozzolanic

Abstract

Concrete is a crucial material in civil engineering construction, but its traditional components, coarse and fine aggregate, are becoming increasingly expensive and scarce. This study aimed to investigate the potential of replacing cement with silica fumes and fine aggregate with carbon fibers to improve concrete's hardened properties. Different concrete mixes were created with varying percentages of these replacements. The resulting concrete specimens were tested for compression, split, and flexural strength after curing periods of 7 and 28 days.

References

E. V. Ajileye, "Investigations on micro silica (silica fume) as partial cement replacement in concrete," Global Journal of Researches in Engineering Civil and Structural Engineering, vol. 12, no. 1, pp. 17-23, 2012. Available from: https://tinyurl.com/3d7wx43v

N. K. Amudhavalli and J. Mathew, "Effect of silica fume on strength and durability parameters of concrete," International Journal of Engineering Sciences & Emerging Technologies, vol. 3, no. 1, pp. 28-35, 2012. Available from: https://ijeset.com/media/4N5-IJESET0202520.pdf

Bureau of Indian Standards, Concrete, New Delhi, India. https://www.sefindia.org/forum/files/CED2_7697_WC_193.pdf

V. S. Ghutke and P. S. Bhandari, "Influence of silica fume on concrete," IOSR Journal of Mechanical and Civil Engineering, 2014. Available from: https://www.sefindia.org/forum/files/CED2_7697_WC_193.pdf

Indian Standard 1199:1959, Methods of Sampling and Analysis of Concrete. Available from: https://iopscience.iop.org/article/10.1088/1742-6596/2070/1/012169/meta

Indian Standard 516:1959, Methods of Tests for Strength of Concrete (Reaffirmed 1999). Available from: https://law.resource.org/pub/in/bis/S03/is.516.1959.pdf

IS: 10262-2009, Recommended Guidelines for Concrete Mix Design, Bureau of Indian Standards, New Delhi, India. Available from: https://law.resource.org/pub/in/bis/S03/is.10262.2009.pdf

IS: 8112:1989, Specification for 43 Grade OPC, Bureau of Indian Standards, New Delhi, India. Available from: https://law.resource.org/pub/in/bis/S03/is.8112.1989.pdf

S. S. Karthick, S. Prakash, and H. Jeniston Davidraj, "Experimental study on strength characteristics on M20 concrete with partial replacement of cement with fly ash and replacement of fine aggregate with copper slag," International Journal of Advanced Research in Education Technology, vol. 1, no. 1, pp. 26-29, 2014. Available from: https://doi.org/10.1016/b978-0-08-100986-4.00003-1

Downloads

Published

2024-10-20

How to Cite

Qadir, N., & Altaf, E. A. (2024). Exploration of Carbon Fiber Concrete with Silica Fume Admixture for Potential Application in Rigid Pavement Systems. International Journal of Innovative Research in Engineering and Management, 11(5), 83–86. Retrieved from http://ijirem.irpublications.org/index.php/ijirem/article/view/78

Issue

Section

Articles